破碎机(打砂机)是投资少见效快的破（粉）碎矿石设备。它具备有安装、操作简便、处理矿量大等特点，

  适用于破（粉）碎小于50毫米的脉矿、砂矿、尾矿的小型选矿厂。

Crusher (play pressure-blasting machine) is less investment rapid broken (powder) crushed ore e It is e with the installation, operation simple, large amount of ore handling characteristics, applicable to break (powder) SuiXiao in 50 mm pulse ore tailings, placers, small concentrator

二、技术参数Technical parameters

三、安装调试Installation debugging

将打砂机固定在槽钢架子上面，用三箱电接在电机上面，将皮带上在打砂机的皮带轮和电机的小皮带轮上面

 ，打砂机的内部的6个砂锤按顺序装在圆盘的钢管上槽钢架子固定在比较扎实的地面上，在用地脚螺丝或者

  用水泥把槽钢架子的下面一部分(60毫米)，在打砂机的两边轴承上要经常加润滑油（黄油）

调试的时候，把打砂机的上部分拿开，然后把里面的砂锤和主轴都拿出来，可以将下面的筛板往上或者往下

 调整，也可将这筛板做更换。

该打砂机的易损件为砂锤和筛板

Will play pressure-blasting machine fixed in channel steel shelves above, use 3 cases of electric motor above, will meet in the belt at dozen pressure-blasting machine of pulley and motor small pulley above, dozen pressure-blasting machine internal six sand hammer in sequence of steel tube mounted on disk

Channel steel frame fixed in firmer ground, on land with cement the feet screws or below part (channel steel shelves 60 mm), playing pressure-blasting machine on both sides of the bearing often should add the lubricating oil (butter)

Debugging when, play the part on pressure-blasting machine, then take away the inside of the sand hammer and spindle all take out, can will below sieve upwards or downwards adjustment, also can bring this sieve do change

The dozen pressure-blasting machine damageable parts for arenaceous hammer and sieveJiangxi Province, through the source processing e Manufacturing Co